MTL - Super Craftsman-Chapter 18 Upgrade

"What is the coordinates?" Guo Tailai asked again.

"Control system upgrade conditions, obtain the data carried by the dormant nano-robot at the coordinates." The control system gives a detailed introduction.

Can I upgrade? Guo Tailai’s heart was a happy one. As long as there are upgrade conditions, Guo Tailai does not mind how hard it is.

What happened after the control system was upgraded? Guo Tailai did not feel it.

“What's new in the upgrade?” Guo Tailai asked in his mind.

"Please explore on your own." The control system gave Guo Tailai a rather speechless answer. This is not the first time. When Guo Tailai just had a control system, he did not know what to do, and he had to explore it himself.

No matter what else, but the processing ability Guo Tailai must definitely test it. This is the fact that now I can have the qualification of insurance research, and I can earn more than 100,000 yuan. Guo Tailai must first confirm.

People are in Liu Lao's work room, some are tools, and they just find a piece of scrap steel clamped on the workbench. Guo Tailai began to start from the most basic boring, the same process test.

Stable, unprecedented stability. From the beginning of picking up the sickle, Guo Tailai noticed that it was different from the previous one.

One hundred times of the nano robot brought to Guo Tailai is not only the strengthening control of the arm muscles, but the overall control of all the muscles of the whole body.

During the processing, the stability of the whole body muscles brought to the hands is that only the arm and the small part of the shoulder and back muscles are completely different. If the previous processing stability can be 1o, then it can definitely reach one. hundred.

It’s just a scythe. After Guo Tailai changed the most delicate scythe, he went down and looked at it. It’s just a sham of ignorance. It didn’t use any strength. However, Guo Tailai’s eyes can clearly see that the surface of the workpiece has been accurately cut off. 5 microns.

Yes, the processing accuracy of the file has already enabled Guo Tailai to accurately reach o. 5 micron, which can already pass most of the high precision CNC machining centers. The only remaining high-precision machining centers, most of which can only do this at most, perhaps only a few of the most powerful machining centers can be a little stronger than Guo Tailai's manual, but It is also extremely limited.

Next, it is the other tools, the same test, in addition to the saw because the nature of the work of the tool itself is unlikely to achieve high precision, the other all without any exception greatly improved.

Overall, Guo Tailai can be processed by hand to o. The processing accuracy of 5 microns is completely no problem.

Another now makes Guo Tai come to the surprise that nano-robots can consume a lot of work and the lactic acid produced in sports.

When the crankshaft and the blade were last processed, because of the tight time, each time the lactic acid was accumulated, Guo Tailai’s arms were sore and unbearable, and after a lot of rest and massage, it was necessary to eliminate it.

This time, the same symptoms appeared. Guo Tailai also issued a command to clear lactic acid, and immediately the nano robot started to execute.

Nano-robots can burn fat to gain power. The incomplete metabolism of lactic acid can also be the same. The only regret is that the number of robots is too small, only one million. The huge lactic acid produced by muscle movement cannot be eliminated in time. Relieve soreness, but it can't be completely solved.

Maybe you can do it when the number is increased again in the future? At that time, perhaps Guo Tailai is a tireless person.

The result of a hundredfold increase in the number of people is that the consumption of fat under normal conditions has increased by a hundred times, which means that the weight loss effect has been accelerated by a hundred times. If it turns out that it took 60,000 years, it will only take more than 600 years.

Of course, this can't be counted. Guo Tailai can use the nano-robot to control muscle movement from the consumption of fat stored in the body, but only because he doesn't want to lose weight at once, will he have conscious control. Losing weight is not a problem for Guo Tailai.

Titanium powder is not safe in the sealed small test tube, and it may be broken if you accidentally. Taking advantage of Liu Lao's work room, Guo Tailai used a very easy to make a hollow steel necklace, poured the remaining titanium powder into it, and tirelessly created a necklace of stainless steel texture, the necklace Hanging on the neck, it will be foolproof.

In fact, the titanium powder stored in the body is enough to replicate hundreds of billions of nano-robots, but who knows how to change in the future, or take it with insurance, ready to use.

After finishing the necklace, Guo Tailai slowly walked back to the dormitory with joy and joy. After playing cards and celebrating with the roommates, he was lying in bed and sipping his dreams into a dream.

"Assembly stress does not need me to say the principle, you should know." The next day, Guo Tailai followed Liu Lao to continue to learn the assembly, Liu Lao step by step explanation, Guo Tailai has learned the fastening of the assembly screws: "We first tightened The torque of the screw starts."

The precise alignment of what was said before is not difficult for Guo Tailai. His eyes measure the current precision, which can make Guo Tailai more precise than Liu Laofeng's moment. Even the most demanding assembly of cylinders and pistons that require strict and vertical or parallel, Guo Tailai can do it. No need to adjust multiple times.

Today I talked about the fastening part of the precision instrument, which involves the tightening of the screw and involves a tool with torque. If there are design and assembly requirements, it is natural to adjust the torque according to the design requirements. If there is no, you need to rely on experience to judge whether it is too tight or too loose.

Torque measurement, naturally, the torque measuring instrument, the measuring instrument in the fitter workshop, can be accurate to 1 Nm. Guo Tailai took the torque meter and took the trouble to operate, then measured and felt.

“Do you record the torque measurement effect?” After feeling the measurement for thousands of times, Guo Tailai’s mind suddenly received the inquiry information of the control system.

Sure enough. Guo Tailai chose not to hesitate to record the measurement effect. He wanted to be able to feel the torque by his hands. Measuring torque is one of the new functions after the control system is upgraded. Throughout the day, Guo Tailai measured and reappeared in the fitter's workshop, and the fly mastered the torque control of 1 Nm precision.

Of course, this is indispensable for the control of the strength of both hands and the extremely accurate measurement of the length of the arm. Among them, the set of common weights in the workshop also allowed Guo Tailai to feel the quality measurement of 1 gram precision with one hand and one hand.

“Sister, what accurate torque measuring instrument does the laboratory have? How accurate is the weight?” The torque accuracy of 1 Nm, the mass accuracy of 1 g can no longer be met, and the next day, I went straight to the laboratory. Look for Zhao Wei to ask.

//